Carriers for motorcycles

Standard Motorcycle, Dirt Bike, Scooter, Cargo Carriers, & Optional Accessories Price Sheet

General Note on Products:

Most of these items are stocked or back ordered up to 2 weeks. Smoke Gray enamel paint over primer is used on all products. A minimum of (2) red DOT reflective tape markers are added to the cycle and cargo carriers

NOTE: Prices subject to change without notice.

NOTE: A vertical stabilizer bar is recommended for most models

Budget Dirt Bike Carrier – Model: 3B6-19

A class 3 hitch is required for 300 lb. tray capacity/payload Unit has 6" wide tray x 75" long, front wheel tie down bar but no ramp, storage, or vertical stabilization. $175 and up

Scooter Or Small road bike Carrier Model: 2E6-ADJ-1S R42

Class 2 or 2.5 minimum hitch required, 6" wide tray x 75" long. 12"-21 adjustable dimension from center of Receiver pin to center of tray. Can handle scooters or small motorcycles with up to 84" long Contains front wheel chock, front tie down bar, vertical stabilizer bar, anti-wobble feature & 42" ramp. Ramp stores on the carrier and no tools required to load ramp or store All welded construction, Carrier rated for 275 lb. payload: Call for pricing

Standard Dirt Bike Carrier with heavy duty upgrade – Model: 4B6-19-S

Class 3 hitch (3/16" wall receiver tube) 6" wide tray x 75" long & anti-wobble device included. The center of tray is 19" from receiver pin. Contains brackets for front wheel tie downs and has vertical stabilizer. Includes 42" ramp. Carrier rated for up to 600 lbs. payload: Call for pricing

Standard Dirt Bike Carrier with detachable carrier tray for easy shipping or small space storage – Model: 3C6-19-S

Class 3 hitch (3/16" wall receiver tube) 6" wide tray x 75" long & anti-wobble device included. The center of tray is 19" from receiver pin. Contains brackets for front wheel tie downs, vertical stabilizer, and ramp storage on the carrier. Carrier tray bolt to brackets on the receiver tube with 4 bolts Includes 42" ramp. Carrier rate for 450 lbs. payload. Prices from $260.

Standard Dirt Bike Carrier, breaks down into (3) pieces for easy shipping or small space storage – Model: 3D6-19-S

Class 3 hitch (3/16” wall receiver tube) 6” wide tray x 75” long & anti-wobble device included. The center of tray is 19" from receiver pin. Contains brackets for front wheel tie downs, (1) vertical stabilizer, and ramp storage on the carrier. 2 piece carrier tray bolts to brackets on the receiver tube with 6 bolts. Includes 42" ramp. Carrier rate for 450 lbs. payload. Call for pricing.

Scooter Carrier Model: 3B6-21-SC65

Class 3 minimum hitch required, 6" wide tray x 65" long. 21" dimension from center of Receiver pin to center of tray. Can handle scooters with up to 6 ft. wheelbase and 33" wide shroud. Contains front wheel chock, front tie down bar, vertical stabilizer bar, anti-wobble feature & 42" ramp. Ramp stores on the carrier and no tools required to load ramp or store All welded construction, Carrier rated for 275 lbs. payload: Call for pricing

Scooter Carrier Model: 3C6-21-SC65 for easy shipping or small space storage

Same as above except: optional bolt on design for easy storage or mail delivery: Model sold without ramp: Call for pricing

Scooter Carrier Model: 2B6-21-SC65

Class 2 or 2.5 minimum hitch required, 6" wide tray x 65" long. 21" dimension from center of Receiver pin to center of tray. Can handle scooters with up to 6 ft. wheelbase and 33" wide shroud. Contains front wheel chock, front tie down bar, vertical stabilizer bar, anti-wobble feature & 42" ramp. Ramp stores on the carrier and no tools required to load ramp or store All welded construction, Carrier rated for 275 lb. payload: Call for pricing

Scooter Carrier Model: 2C6-21-SC65

Same as above except: optional bolt on design for easy storage or mail delivery: (freight extra) Model sold without ramp: Call for pricing

Standard Road Bike Carrier with 8" wide tray – Model: 4B8-19-2S-R848

Class 4 hitch with side supports 8" wide tray x 85" long with brackets for front wheel tie down and vertical stabilization outside and inside of tray. Carrier includes anti-wobble device and 48" ramp. Carrier rated for 950 lbs. payload: Call for pricing

NOTE: Two (twin) vertical stabilizer bars are recommended for cycles over 500 lbs.

Standard Cycle Carrier Dirt Bike or small Sport Bike and Cargo Tray – Model:  3C6-19-1S-CC-18

Class 3 hitch (3/16” wall receiver tube) 6" wide tray x 75" long. Contains brackets for front wheel tie downs, vertical stabilization, ramp storage on the carrier. Carrier includes anti-wobble device. Carrier tray bolts to brackets on the receiver tube with 4 bolts This package also contains a detachable cargo tray measuring 18" x 48" with a payload up to 450 lbs. You add wood or steel for the base of the cargo carrier Carrier rated for 450 lbs. payload with expanded metal floor on cargo carrier: Call for pricing

Standard Road Bike Carrier with 8" wide Detachable Tray for shipping and easy storage – Model: 4C8-19-2S-R848

Class 4 hitch with tube steel side supports, 8" wide rear tray / 6" wide front tray x 86" long. Front and rear horizontal stabilizer bars and vertical stabilizer inside and outside of tray. Carrier includes anti-wobble device and 8" x 48" loading ramp. Carrier rated for 950 lbs. payload: Prices from $410.00. 60" and 72" Loading Ramp upgrades available.

Large Road Bike Carrier with 10" wide detachable tray for shipping or easy storage.

This model is meant for up to 240 mm rear wide tires: Harley Vrod, Custom Choppers or Victories.
Model: 4C10-21-2S, R1072, Class 4 model hitch, 10” wide tray x 72” long with 2” tube steel side supports, front and rear horizontal stabilizer bars and 2 vertical sta-bars.
Carrier tray bolts to receiver assembly with (6) bolts and lowering kits are optional for easier loading of the bike. Carrier rated for extended service at 900 lbs. Call for pricing and application consultation.

Class 2 Cargo Carrier: 2CC-5-18-4/2CC-5-18-4-B –– Base Added.

A class 2 receiver is for a car, SUV, or other class 2 hitch. Platform size: 18" x 48" with (4) tie down holes. *You add the base/floor of the assembly. 7" dimension hitch pin to start of the platform. Max capacity: 300 lbs. (class 2 hitch limit). Carrier includes anti-wobble device. *Same unit with expanded metal base included: Call for pricing

Class 3 Cargo Carrier: 3CC-5-18-4/3CC-5-18-4-B –– Base Added.

A class 3 receiver is for a large sedan, van, truck, or SUV. Platform size:18" x 48” with (4) tie down holes. *You add the base/floor to the assembly. 5" dimension hitch pin to start of the platform. Maximum capacity: 450 lbs. (class 3 hitch limit). Carrier includes ant-wobble device. *Same unit with expanded metal base included: Call for pricing

Class 4 Cargo Carrier: 4CC-5-18-4/4CC-5-18-4-B –– Base Added.

A class 4 receiver is for a large sedan, van, truck, or SUV. Platform size: 18" x 48" with (4) tie down holes. *You add the base/floor to the assembly. Carrier includes anti-wobble device. *5" dimension hitch pin to start of the platform. Max capacity: 950 lbs. (class 4 hitch limit): Call for pricing. *Same unit with expanded metal base included: Call for pricing

Steel Loading Ramps with Quick Disconnect Tongue
(no tools required to detach from carrier or load bike) –– *Add HD to R6 models for bikes exceeding 450 lbs. Call for pring on load ramps.

• R6-30 – 6" wide x 30" long
• R6-42 – 6" wide x 42" long
• R6-HD-42 – 6" wide x 42" long
• R6-60 – 6" wide x 60" long
• R6-HD-60 – 6" wide x 60" long
• R6-72 – 6" wide x 72" long
• R8-48 – 8" wide x 48" long
• R8-60 – 8" wide x 60" long
• R8-72 – 8" wide x 72" long
• R9-84 – 9" wide x 84" long
• R10-72 – 10" wide x 72" long
  Note: All 8" wide ramps are heavy duty

Stabilizer Equipment For The Cycle Carriers:

• Vertical Stabilizer bar: quickly mounts to any SAS LLC carrier with the stabilizer bracket: approximately 35" long and includes mounting hardware: $20
• Vertical Stabilizer bar adapter kit: (uses 2" “U” bolt to mount on any class 3 and 4 carrier missing the vertical stabilizer bracket) mounting the above stabilizer bar: $20
• Front or rear wheel tie bar/horizontal stabilizer, bolts on: 1" tubing x approximately 23" long with steel washer for magnetic lights, tie down hooks and pre-drilled holes for mounting to the tray: $14
• Front or rear wheel tie bar/horizontal stabilizer, bolts on: 1" tubing x approximately 23" long with tie down hook, mounting bracket for LED or incandescent bolt on lights, and pre-drilled holes for mounting to the tray. All mounting hardware is incuded: $17

Accessories:

Stay Legal!
Magnetic Base Towing Light Kit

MTL-1 – Pre wired for running lights, brake lights and turn signals with 4 pole extra long flat plug and electrical connectors: $44

Bolt-On Rectangular LED Towing Lights

LEH-1 – You attach to carrier and wire to harness, all parts/hardware provided: $40
5" LED lights attach to front and rear horizontal stabilizer bars

LE-1 – Holes drilled in carrier and lights attached: $50

LEC-1 – Holes drilled in carrier, lights attached, and harness assembled: $60

B-INC – Bolt on Incandescent Lights, you assemble from complete kit: $35

Grommet Lights:

GL – LED Lights fit into rubber grommets - water proof and bright, pre wired.
Brackets and Lights - you wire: $80
Brackets and Lights pre wired: $90

Tie down Accessories:

Cam style tie down/lashing strap to securing wheels to the carrier tray: $7 pair.
No mark loop connectors for tying to forks frame or handlebars: $15 pair.

Steel Ramp tongue:

LRB – Make your own ramp from wood or steel but start with the angled tongue and quick-disconnect bolt for adapting directly to SAS carriers. approximately 5" square and 3/16" thick. Build it yourself and save some money on the ramp! $6.50

Ladder Rack for receiver hitch:

Slide the ladder through this ladder rack and onto the vehicle roof rack without damaging the paint on the car. This rack is made to order. Can be class 2 or 3 hitch x 60" long vertical with “goal post” at the top for retaining and tying down ladder or other long accessories: starting price $140

Towing bar for towing a vehicle

Towing bar for class 3 hitch. This is a “T” shaped bar for attaching to the towing ball and attaching to the bumper, bumper cover or towing bracket. At the bumper attachment point, a series of slots, let you find an optimal location for attachment with long bolts (not included). Always secure with a safety strap prior to towing! Max towing capacity: 5,000 lbs.: $110

Felt Pads:

FP-1 – Provide cushion between Vertical Stabilizer Bar and your Bike: $15